/?path=59&product_id=20278&route=product%2Fproduct
/index.php?route=information/gdpr

ED60P

6”, Passive, 2-way, Full-range,Loudspeaker System

 
  • Overview
  • Specifications
  • Gallery
  • Downloads
  • Related (9)
  • Accessories (2)
  • The ED60P is a compact, lightweight, two-way passive point source loudspeaker that provides great performance from a very discreet and easily manageable enclosure. It is designed for sound reinforcement applications requiring high quality sound and accuratereproduction in a space-saving format.
    The 6” low frequency driver is matched to a 1” high frequency compression driver, both components using aluminium voice coils for low weight and good transient response, with an audiophile-grade passive crossover.

    The ED60P’s non-symmetrical vented enclosure allows it to adapt to multiple portable and fixed applications, such as front-of-house duties on a speaker stand, or pole mounted on an associated subwoofer or, by using the 35° wedge angle, as a very compact and low profile stage monitor. In addition the 7° angled sides enable it to be deployed as a discreet stage lip front fill loudspeaker.

    A key feature of the ED60P is its asymmetrical high frequency coverage pattern, varying from 120° horizontal in the lower part of the horn for more effective near field coverage, and narrowing to 70° horizontal at the top of the horn for more focused coverage in the far field. The result is more accurate coverage of a typical auditorium than is possible with a fixed horizontal coverage device. The HF horn is also rotatable through 90° by simply removing four screws and re-aligning the horn, so that in a stage monitor mode the asymmetrical pattern optimises coverage for performers both near to, and further away from, the monitor. This rotatable horn feature also makes it possible to maintain the ideal coverage pattern when the cabinet is installed in a horizontal (landscape) format.

    The 15mm phenolic birch plywood cabinet is provided with a 35mm pole mount, a recessed handle for easy lifting and handing, and M8 rigging points to allow suspension in fixed installations using optional mounting brackets. Two Neutrik® speakON™ NL4 connectors provide input and link connections.

    To extend the system’s low frequency response the ED60P can be complemented by subwoofers from the Axiom SW series such as the SW210P or SW18P.

    The ED60P can be wall mounted in permanent installations either vertically or horizontally using the KPTED60B wall bracket. The wall bracket allows seven steps of incremental rotational adjustment to enable the louspeaker to be accurately aimed. When mounted horizontally the loudspeaker’s asymmetrical HF waveguide can be rotated through 90° within the enclosure to maintain the optimum coverage pattern.

    KEY FEATURES
    • Passive two-way point source
    • Compact lightweight enclosure
    • 6” woofer, 1” HF compression driver
    • Asymmetric HF coverage pattern
    • Rotatable HF horn
    • Non-symmetrical, multi-angled enclosure
    • M8 and M6 flying points
    • Pole mount socket
    • Black or white finish

    APPLICATIONS
    • Distributed systems
    • Theatre underbalcony
    • Corporate and A/V
    • TV and broadcast
    • Stage monitoring
    • Near fill and front fill
    • Live music venues
    • Bars and restaurants
    • House of Worship
    • Retail outlets

    SYSTEM  
    System’s Acoustic Principle 2-way vented enclosure
    Frequency Response (-6dB) 85 Hz - 18 kHz
    Nominal Impedance 16 Ohm
    Horizontal Coverage Angle 70° to 120° asymmetric, (-6dB)
    Vertical Coverage Angle 60° averaged, 1kHz to 20kHz (-6dB)
    Sensitivity 4V 92 dB SPL @ 1m
    Maximum (peak) Output 114 dB SPL @ 1m
    TRANSDUCERS  
    HF 1" exit lightweight, ferrite magnet compression driver - 1" Aluminum VC
    LF 6" ferrite magnet low frequency woofer - 1.5" aluminum VC
    INPUT CONNECTIONS  
    Connector Type  Neutrik® Speakon® NL4MP x 2 (1+/1- signal IN & LINK ; 2+/2- thru)
    POWER HANDLING  
    Input Power Rating (AES) 100 W
    Input Power Rating (Program) 200 W
    ENCLOSURE & CONSTRUCTION  
    Width 210 mm
    Height 390 mm
    Depth 190 mm
    Taper Stage Monitor: 35° - Frontfill: 7.5°
    Enclosure Material 15mm, reinforced phenolic birch
    Paint High resistance, black or white water based paint
    Flying system 2 x M8 flying points or dedicated metal bracket
    Net Weight 5kg (11 lb)
    3D Model
    ED60P-3D.dwgTechnical Drawing 3D
    ED60P-3D.3dsTechnical Drawing 3D
    Software
    AXIOM_ED60_v1_0.zipEASE models
    Data Sheet
    ED60P datasheet 2018.pdfData Sheet
    Technical Drawing
    ED60P-2D.dwgTechnical Drawing
    KPTED60B_C-Shape Bracket.dwgTechnical Drawing 2D
    User Manual
    FI-0148-00 KPTED60B.pdfKPTED60B User's Manual
    ED60P_UM_ENG.pdfUser's Manual
    KPTLTP KPTLTP Bracket for LTX
    KPTED60B KPTED60B C-bracket for ED60P